C.SCOPE 8kHz and 33kHz General Purpose Sondes allow the route of non-metallic pipes such as sewers, drains and large plastic gas and water mains to be traced. Ideal for finding the position of blockages in pipes and powerful enough to be detectable at 7metres (23 foot) depth dependent on type of C.SCOPE Locator used and site conditions.

The Flexible Tracer is highly effective at locating and tracing the route of small diameter, non-metallic ducts, pipes, sewers and drains.
When used with any C.Scope Cable Locator and Signal Generator, both the route of a non-metallic pipe and a particular end point can be pinpointed with the Flexible Tracer. This is particularly useful for identifying the position of any blockages or obstructions within the pipe.

The C.Scope Signal Clamp allows operators to apply the Generator/ Transmitter signal (from a SGA, SGV, SGA2, SGV2 and MXT2) effectively to any cable. It is an extremely practical way to allow individual cables to be traced even when the cable is in amongst other cables.

The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to Generator/ Transmitter Mode. The location of a blockage can be identified using this system with enormous cost saving potential.

Developed as a result of requests from the British gas industry the C.Scope Plastic Pipe Tracers are the smallest diameter product on the market and can be successfully inserted into pipes when nothing else fits. Their unique construction gives unparalleled reliability and yet allows both line tracing and the all important end tracing using the remarkable Sonde technology housed at the very tip of the Tracers. Available in 20 or 50 metre lengths (65 and 160 foot).

The C.Scope Signal Injector is an accessory which when connected to a C.Scope Signal Generator or Transmitter applies a signal safely to an electrical system via a conventional 3-pin power socket. This signal will then be detectable on the buried supply cable outside the building and any supply cables within the property. To transmitted signal can then be detected by a C.Scope Cable Avoidance Tool or Precision Pipe and Cable Locator.