For the surface preparation of small areas or areas close to walls or between re-bars, the 1UF-TVR is second to none. It’s also the ideal tool to compliment the U3-VR or the FB5-VR to scabbler edges where larger Machines can’t reach. It can remove up to 4 square metres per hour x 4mm deep, to a depth of 50mm.

The vibration levels transmitted to the operator by the are typically less than 10% of the levels which are transmitted by the “Standard” 1UF pole scabbler.

This Macdonald, Vibration Reduced Breaker will suit any type of job. Designed to withstand the extreme demands of the plant hire industry, combined with the light weight preferred by the utilities and local authorities. The Macdonald 28SVRT strikes a perfect balance between hard-hitting performance and the reduced vibration levels required by todays operator.

This Macdonald Vibration Reduced Demo pick is ideal for demolition work in brick, concrete and pile capping. The DP11VRS hosts versatility and low vibration levels combined in a single tool with Quick Latch Retainer and 4 Bolt Backhead for incresed durability.

The Macdonald 2315V Rock Drill is a medium weight tool designed for drilling holes suitable for blasting operations in mines, quarries and is capable of being used on rock of varying hardness.

Vibration Reduced Pneumatic Scabbling Tools are specifically designed for all types of surface work on concrete where it is necessary to carry out surface hammering without in any way damaging the basic concrete.

The Macdonald NG28 Standard Non vibration reduced Needle gun is the ideal tool for the removal of paint,rust and accumulated scale from a wide variety of surfaces.

It can be used in many different applications such as stone cleaning and restoring, welding, tank cleaning and removal of corrosion caused by sea water on shipping etc.

MS3-VR Vibration Reduced triple head scabbler is designed for medium duty work in de-scaling, laitence removal and concrete repair.
The tools are made to the same high standards for reliable and durable performance as other tools in the range but are vibration reduced to allow the operator longer continuous use.

Vibration Reduced Pneumatic Scabbling Tools are specifically designed for all types of surface work on concrete where it is necessary to carry out surface hammering without in any way damaging the basic concrete.

The S1-VR single head hand held scabbler is the ideal tool for small awkward areas when removing laitence or for concrete repair work.
The tool is made to the same high standards for reliable and durable performance as the larger tools in the range with the additional benefit of being vibration reduced to allow longer continuous use by the operator.

The Macdonald Air Blow Lance produces high-pressure air flow used for clearing out areas from dust, leaves, etc, often used for concrete preparation.
Our model has a trigger on-off switch and handles guard to avoid any accidental operation.

The Macdonald DM11S is the most versatile tool for general work and ideal for demolition in brick or concrete. Well, balanced & Manoeuvrable for working in confined areas with a choice of the outside or inside the trigger.